Innovative Ideas to End Plastic Waste

Plastics are products that are a huge disturbance to the healthy environment. These plastics can produce GHG, methane, and ethanol during manufacturing, transportation, and after it gets decomposed. It should be noted that plastics took at least 100 years to decompose themselves, and there are no safer methods to dispose of the plastics. It will pollute the environment heavily when it burns, so it is not advisable to burn plastics. These plastics are dumped into landfills, and oceans where it is the major cause of natural disasters. It will generate more heat in the landfills and lead to global warming. Plastics cannot be eliminated completely from the world, but the use of those products can be minimized. Here are some of the innovative ideas to end plastic waste.

Innovative Ideas to End Plastic Waste

1. Using Plastics in Road Construction

Toby McCartney found that the plastics are used to seal the cracks and gaps by meting them. He found this during a trip to India and tried to implement it in the UK. First, he cannot get the desired result, after 844 failures he got succeeded in his innovation for road construction. In this process, he used only the single-use plastics which are going to landfills.
He mixed the plastic with the bitumen materials and finally, he got the desired toughness and strengthened material. Now he is ready to use practically in roadways to get a strong and smoothy road construction. This eliminates the plastics get into landfills and the ocean.

Ideas to End Plastic Waste

2. Apparel from Plastic Bags

A young graduate in the UK noted that over 700 billion plastic bags are wasted each year. All the plastics are ending up in landfills or ocean dumping. To avoid this unwanted pollution, he tries to make an overcoat using single-use plastic bags. At first, it was avoided but later, these coats are used as raincoats on the daily basis. This coat is made with the wastes of single-use plastics. This will reduce the generation of plastic waste in the environment.

3. New Shelter with Plastics

In the UK, a young engineer has proved that plastic is strong enough to withstand water and air. So, he constructer many plastic shelters for poor people at low cost. He also constructed a free shelter for the roadside people and pets to stay safe. This improves the lifestyle of homeless people and also saves the environment from the generation of plastic waste.

Avoid Plastic bags

4. Biodegradable Plastic

Though plastics are harmful to the environment, we cannot avoid the use of plastics. So, Mobius a company in the UK, have invented the biodegradable plastic for the agricultural purpose. It is a cover that is used to cover the crops. This plastic will not stay on the earth for years, it will break down quickly and decompose itself without any pollution. Mobius did this with the plastic wastes which are generated and moved to the landfills.

Conclusion

Above are some of the most inspired and innovative ideas to end plastic wastes. Not only these you can make your own plastics for another purpose instead of throwing them off. You can make the containers and the plastic bottles to grow small plants in your home and they can be used for decoration.

How to handle kitchen waste recycling process?

Kitchen waste recycling is the process of recycling kitchen leftovers and food wastes. Kitchen waste is normally food waste, and the food is primary for all living things. Throwing off the food is an easy one but there are many people who do not have food even for one time in a day. Please, throw off only the waste materials like, eggshells, wrappers, banana skin, etc., Instead of throwing the waste food into a bin, collect that food and give it to the people who are suffering from the food, it will be a good manner and you will be blessed by those people.

Kitchen waste recycling

Home composting is one of the best methods to dispose of food waste which can be used as a fertilizer for your garden. There are many ways to dispose of our food materials like dropping the waste in a recycling center. According to statistics, it is shown that around 7 million tonnes of food waste is thrown into landfills by a family in the UK and most of that waste is eatables. It is increasing and now a family is wasting up to £700 a year by throwing the food materials

Food waste is dangerous in that it attracts insects easily and it will generate toxic chemicals and GHG which are harmful to the environment. so kitchen waste recycling is one of the best methods to overcome this situation.

Kitchen waste recycling

Compost the waste materials

Composting is one of the best methods to recycle food wastes. There may be many other methods, but composting can be done easily and effectively. The process needs a space according to the amount of waste segregated. You need to collect all the wastes and dump them into a dark place and leave for a week after some time the wastes gets decomposed completely and will be converted to a black colored material which can be used for agricultural purposes. The recycled waste acts as a fertilizer and you can grow your garden plants with this naturally made fertilizer.

Food composting

 Creative use of leftovers

The wastes can be recycled on your own in simple ways to reduce the cost, but you should do some different works. Some of the ways like rubbing the banana skin instead of the polish can reduce your regular chemicals. Some of the vegetables like cucumber, potato, and tomato cut wastes can be used to chill your eyes and you can free your mind with a little meditation and it refreshes your feeling and reduces your pressure. Peels from lemon, orange, and other citrus species can be used as skincare to protect your skin from unwanted germs.

food waste recycling

Waste-To-Energy (WTE) System

The process of conversion of waste into electrical energy is commonly known as Waste-To-Energy (WTE) system. This can be done in major power plants to produce high-pressure steam which helps the turbine to run maximum speed to produce emf the term which acts as electricity. This process is also called as Energy-From-Waste (EFW). This waste acts as a fuel that reduces naturally generated coal, which is generally in use. The coal mines will be reduced number if this way of energy-producing system run in major roles.

Summary

The food is wasted by each person who is responsible for creating many foodless people in this world. Please, utilize your food properly if you did not like your food, do not waste that by throwing it off in a dustbin, instead give that parcel to a person on your street side. If there is no such person in your area you can give that food to your own dog or any street dogs who act as security for your whole street.

Why Rubbish Removal Is Important For Domestic Areas?

Garbages collected from various sources like domestic and commercial areas should be disposed of in an eco-friendly manner so that it will not cause any hazardous danger to human health and the environment as well. The domestic wastes contain materials like plastic wastes, food wastes, flammable materials, toxic materials, rubber materials, etc. Throwing of these wastes in public areas and water bodies will cause the hazardous effect to the environment. The water bodies may lead to the agricultural land fields, so throwing wastes in them will have the significant effect on the crop yields.

domestic wastes clearance

The non-decomposable wastes like plastics, rubber materials from the domestic areas should not be burned as it will emit highly toxic smoke which is injurious to the environment and the human health as well. Burning the plastic materials will emit a smoke containing dioxin which has the direct effect on the human immune system. The dioxin will also deposit in the crop yields which in turn is consumed by the human beings as the food source. Thus the non-decomposable wastes must be taken care to dispose of them in an eco-friendly and safe manner.

domestic waste clearanceDomestic waste should be disposed of safely by the help of rubbish removal companies. The waste clearance companies will collect the domestic waste directly from the source and will segregate into decomposable and non-decomposable wastes. The decomposable wastes are processed and converted into organic manure or energy like gas, heat, etc. The non-decomposable wastes are collected in a large manner and sent to the recycling plant for reuse.

domestic waste removal

The other way to reduce the waste production is by reducing the usage of non-decomposable waste like plastic materials, plastic bags, etc. These materials can be replaced by an easily bio-degradable material so that waste disposal will be easy. To preserve the environment, the non-decomposable wastes should be handled in an eco-friendly manner.

domestic waste removal london

 

The rubbish removal companies around the city will involve in collecting the wastes from various sources and disposing of them safely in an eco-friendly manner. The domestic wastes should be handed over to the waste clearance companies so that the waste disposal will undergo in a safe way. The organic wastes can be disposed of to be converted into energy sources like gas, heat, etc. The manure that is produced from the organic waste sources can be used in the agricultural land fields for the better crop yielding. Due to long working hours and busy lifestyle, people may not find time in disposing of the waste. In this case, Quickwasters comes into play, who will collect the wastes directly and will involve in disposing of the collected wastes in a safe and eco-friendly manner.

 

Benefits Of Recycling Non Biodegradable Materials

The Collection of waste materials from the various sources may contain both bio-degradable and non bio-degradable materials in it. These wastes are segregated separately to dispose of them in an eco-friendly manner. The wastes like plastics materials, glass materials, metal scraps, etc must be taken care to dispose of safely. the non-decomposable waste materials are sent to the recycling plants for reuse.

recycling plastics

Plastics materials and rubber tires are burnt in many cases as the manner of disposing of them. The smoke that is produced by burning plastics, rubber materials are more toxic to human health and the environment as well. The plastic smoke may damage the immune system, interfere with hormones and also may cause diseases like cancer. Burning the plastic releases dioxin, Dioxins are more injurious to human health and the plants as well, Dioxins will deposit on the crops and in the water bodies. If the humans intake the food containing dioxins, then it will directly affect the immune system. Carbon dioxide is enormously produced by burning the trashes, this has the significant effect in the ecosystem.

metal scrapThe safe way to dispose of the plastic wastes is by recycling. In this method, the non-decomposable plastic wastes are collected in a large manner and then sent to the recycling plant. The metal scraps are collected in a large manner and melted to reuse them in the production. In this method, the energy needed to produce metal from the raw materials is very less on comparing to melting the old metal scraps. Though it involves lots of energy consumption, it is only the efficient way to dispose of the metal scraps.

plastic recyclingWaste materials like rubber tires can be sent back to the retailers who will process it and use again in the production. The burning of the rubber tires will also produce toxic smoke which will have hazardous effect in the human health and environment as well.

The Waste Clearance companies will collect the waste in the large amount, They will also segregate the waste into decomposable and non-decomposable wastes. The biodegradable material is sent to the compost for organic bio-degradation. The organic bio degradable wastes are converted into energy like gas, heat or manure whereas the non-bio degradable wastes like plastics, PVC, metals are sent for recycling. The proper disposal of the wastes is taken care by the waste clearance companies. They will ensure that the disposal of wastes occurs in a safe and eco-friendly manner.

 

Tips For Converting Waste Into Energy

Wastes are generated in an abundant manner from domestic areas, industrial areas, organizational areas, etc. The waste material may contain both decomposable and non-decomposable materials in it. The special care must be taken to segregate the wastes and to dispose of them safely in an eco-friendly manner. The decomposable materials can be processed and converted into energy.

waste to energy

Waste treatment is the process of generating electricity or heat energy from the decomposable waste materials. The waste materials are collected in the large amount from the domestic and industrial areas, They are then dumped into large pits. Later these wastes are burned to produce the heat energy. Thus, in this case, the waste is converted into thermal energy. Now, this thermal energy is converted into the electric energy by turning the turbine on.

Another energy source from the garbage wastes is methane gas. The methane gas is produced from the waste decays which can be used as a fuel. The Kitchen wastes can be utilized well to generate energy.

Steps to convert kitchen waste into energy:

waste energyInitially, the wastes are separated into dry wastes and wet wastes. These wastes are stored in separate trash cans. Once the cans are full the wastes are dumped into composts. The compost is also filled with dry leaves. The semi-composted materials like buttermilk, cow dung, etc are added to start the decomposition process. The pile is turned around daily to make sure that it is maintained at the right level of dampness. If the pile is too wet then the dry leaves are added. If the pile is too dry then water is added. The compost is left as like for more than a month to decompose. After two months the compost will turn out into a manure which can be used in agricultural fields.

waste energyThe bio-degradable wastes can be converted into energy or manure. Whereas the non bio-degradable wastes must be taken care to dispose of safely in an eco-friendly manner. The non decomposable wastes like plastics, rubber tires, etc are sent to the recycling plant for reuse. Other waste materials like metal scraps, glasses are also treated in the same way. Throwing of the wastes into the agricultural lands must be avoided in order to preserve the environment. Burning of plastic wastes and rubber tires will produce toxic gases which are injurious to human health and hazardous to the environment as well. The waste clearance companies will involve in recovering the solid wastes and disposing of them in a safe eco-friendly manner.

How To Dispose Non-Bio Degradable Waste?

What is Non-Bio degradable Waste?

non bio degradable waste

Non-bio degradable waste is the materials which will not undergo the process like decaying by natural manner. Non-bio degradable wastes are more dangerous to the environment and humans as well. The bio-degradable wastes are the materials which will undergo the decay process by itself in a natural way. This will not bring any harm or danger to the human beings or the environment as well. The non-bio degradable wastes like plastics must be recycled.

Hazardous effects of Non-Bio Degradable Wastes:

Many hazardous effects are by Non-Bio degradable wastes. These plastic wastes in water bodies like the ocean, river, etc may cause effects to the fishes and other living organisms in the water. Plastics materials in the water bodies will not sink, instead, they will again return to the land areas nearby. Plastic materials in the land areas cause drastic effects to the plants, trees. As they are not bio-degradable, the plastics will not allow the rainwater to penetrate into the land thereby lowering the underground water source. The burning of materials like plastics, polyethylene covers, rubber tires, etc. may cause air pollution. Inhaling this plastic smoke may cause effects to the health like hormonal imbalance, skin problems, etc.

Source Of Non-Bio Degradable Wastes:

Non-Bio Degradable waste is mainly from the domestic areas like homes, office areas, industrial areas, etc. The Non Bio-Degradable wastes like plastics, polyethylene bags are littered by people in the public areas after the usage. The Non-Bio Degradable wastes can be collected in a large amount from public places like beaches, stadiums, organizations, etc. The only way to dispose of the wastes in a safe manner is only by collecting them and sending back to the recycling plant. The other way to manage the plastic wastes is by reducing their usage.

Non-Bio Degradable Waste Management:

quick wasters londonThe Non-Bio Degradable wastes can be collected and can be stored in a storage area, later on, they can be taken to the recycling plant instead of throwing them in the water bodies or in agricultural land areas, The other way to manage the non-bio degradable waste is that by the reduced usage. this can be ensured by using the degradable materials more.

The Plastic Wastes from the domestic areas can be stored in a waste storage area and later on, they can be handed over to the waste clearance companies. The waste clearance companies will ensure the activity of disposing of them in the more safe way. The Waste clearance companies will collect the wastes from the domestic areas or the industrial areas upon their request and will separate the bio-degradable and non-bio degradable wastes. They will take care of sending the non-bio degradable waste to the recycling plant for reuse. Thus we can help the environment by not getting polluted by handling over the non-bio degradable wastes to the waste clearance company.

 

How to Dispose Solid Waste Safely?

What is Solid Waste?

Solid Waste may include the garbage’s from the home’s, unused furniture, metal scrap, plastic bottles, construction wastes, metal wastes from industries, etc. The main source of the solid wastes is construction waste, domestic waste, waste from working areas like offices and large organizations. The more hazardous electronic wastes will also come under this category, the electronic wastes may contain the materials which must be disposed of very safely. Some waste’s like plastic must be disposed of or recycled in a manner that it won’t produce any effect on the environment.

solid waste

Sources of Solid Waste:

The main source of the solid waste is the construction areas. They produce the waste materials like concrete wastes, metal waste, wood materials, etc.

The most common wastes that are from construction areas are wiring cables, nails, dredging materials, bricks, etc. The other common source of solid waste is from home. The wastes like plastic materials, garbage wastes, etc tend to come from the domestic areas. The household wastes also contain materials like old solvents, fertilizers, paints, pesticides, etc. which must be decomposed in a safe manner. The other big waste source is the Electronic waste. The electronic wastes include discarded electronic devices, damaged parts from computers, etc. The electronic waste may contain chemical agents like lead, cadmium or beryllium. they must be disposed of in a safe manner as the improper disposal will result in significant risk to the people and the environment as well.

Solid Waste Management:

In Construction areas, the wastes can be controlled by sending the waste materials to back to the recycling plant, for instance, the metal scraps can be sent to the recycling plant and can be used in warping the new steel materials. The wood wastes may be crushed and used for various other purposes.

The proper way to dispose of the domestic waste is that the household wastes can be handed over to the waste clearance companies as they will take care of disposing of them in a safe and eco-friendly way. This is the easy and safe to dispose of the domestic wastes.

The more care must be taken to dispose of the electronic waste as the improper disposal may lead to very dangerous hazardous effects to the human beings and also for the environment. So the electronic wastes must be handed over to the waste clearance company, who will take care of removing the electronic waste in a more safe way.

The things to keep in mind while disposing of a waste is that whether it is decomposable or not. The decomposable wastes can be cleared in an easy way when compared to the other. The wastes like plastic, metal scraps, etc must be used for recycling whereas waste clearance companies will take of clearing the wastes which is difficult to dispose of.

Reasons For Using Quick Wasters Removal Services

If you live in London then there are numerous reasons why you might need to use Quickwasters services.

London waste collection after building work

One reason to use the best Waste removal service in London (Quick Wasters), is if you have had building work done, or if you are in the building trade yourself.
If you happen to work in the construction industry then you are probably quite familiar with the rubbish that is generation during and after a job. At some point it will need to be removed from the premises and most construction companies will hire a skip to get this job done.

While a skip might work in some cases, we advise against doing so for a number of reasons. Apart from the fact that you will need to load the skip yourself, in London there are always issues with parking and permits, and it becomes a hassle to organise and ends up more expensive than it first seems.

London waste collection after landscaping or garden work

Another popular reason for using a London waste collection service is for clearing up after landscaping or garden work. There is likely to be a pile of rubbish that needs taking away, and it’s generally not the sort that is easy to take to the tip yourself. It could be tree branches or bags of leaves. These would be considered organic waste of course and you will need to find a company that actually hauls this type of waste.

Advantages of using a London waste collection service

benefit-of-a-waste-removal-service

These are just some of the advantages:

  • A London waste collection service will remove almost any type of rubbish or junk.
  • If you use a reputable company they will recycle as much of it as possible.
  • They will do all the loading work and clear up afterwards.

Quick Wasters are the right company for the job,  theythe relevant licences and are committed to recycling the majority of waste. Our pricing is clear with no hidden costs.  Quick Wasters and professional London waste collection service that will save you money and hassle and give you a fast and efficient service.

 

For more information regarding waste removal services visit: www.quickwasters.co.uk

Quick Wasters Guide To Food Waste Reduction

Food prices are continuing to rise and it can be difficult for families to prepare healthy nutritious meals each day,  especially as in many households both parents often work.

food-waste-reduction

Living in London doesn’t help, the hustle and bustle and fast paced environment can increase stress levels and with many people no longer feeling secure in their jobs, preparing a hot freshly cooked meal really doesn’t seem like a priority at the time.

The truth of the matter is that eating well can help you remain healthier, better able to concentrate and more importantly helps educate your children.

  • Cook in batches

  • Use leftovers

  • If you use home shopping then why not try something like the Tesco delivery saver and have your shopping delivered twice weekly, this way you will get less waste

  • Shop more often, there are an abundance of fabulous small retailers in London selling fresh produce

  • Plan your meals in advance

  • Write a shopping list

  • Make twice as much as you need for a meal and then freeze half for another day

To find out more information, then visit: www.quickwasters.co.uk

Top Tips For Recycling Plastic

Plastic is plastic, right?  Unfortunately, when it comes to recycling, it’s not.  There are many different types of plastic and very few of them are suitable for recycling.  As a result, when you think you’re being helpful by popping that yogurt pot in with your plastic bottles, what you could actually be doing is ensuring that that bag of bottles is heading straight to incineration or landfill.

While plastic is a great packaging material, it’s not all that easy to recycle.  Especially when you have different types and qualities of plastic all mixed together.  The processes for recycling plastic differs depending on the type of plastic, and markets only exist for three types of reprocessed plastic:

2. Plastic bottles.
Plastic bottles in particular are easy to recycle.  They’re manufactured using one of two methods, which are easy to detect using infrared technology.  They should be empty but don’t require washing, and there’s no issue with regards to bottle tops, or colour, unlike with glass.  So you can make a huge difference to the environment, just by separating out your plastic bottles.

3. Plastic films, such as plastic bags and shrink-wrap.
Plastic film requires high volumes and consistent quality to be cost efficient, but collecting it separately makes a huge difference to the amount that’s recycled.